rf calibration

Wind Velocity / Anemometer Calibration




Contact Us:
(818) 701-4969

Micro Quality Calibration ("MQC") is at the forefront of the Metrology industry with a service offering and capabilities unmatched among its peers. Our A2LA ISO/IEC 17025-2005 accreditation mandates us to uphold the highest level of quality assurance, documentation, and accuracy so that you can rest assured your equipment will be serviced to the highest quality disciplines while our staff provides exceptional service and keeps you updated on your equipment. Request a price quote for anemometer calibration today!

With the addition of the Omega state-of-the-art wind tunnel MQC has the ability for anemometer calibration (highly accurate to 1% of reading). The new Laboratory Grade Benchtop Wind Tunnel is designed to give a highly uniform flow rate over 152mm (6") test section with a variable adjustable speed from 0 to 10,000 RPM. The established differential pressure measurements versus flowrates are listed from 25 to 9000 FPM. Calibration sheets are included, which makes calibrating different flow sensors simple.

Uniform flowrate is determined by monitoring a highly repeatable differential pressure sensor which has been calibrated to each individual wind tunnel as a system. Each wind tunnel is supplied with two restrictive plates for achieving optimum low flowrates. The deluxe wind tunnel package provides an environmental monitoring system that measures barometric pressure, room temperature, humidity and differential pressure. By monitoring room conditions, standard differential pressures can be converted to actual differential pressure readings to ensure accurate flowrates.

 

 

Preparation

Our Wind Velocity Laboratory not only uses the most advanced state-of-the-art equipment but is also environmentally controlled (both temperature and humidity are closely monitored 70°F with relative humidity not to exceed 40%) to give the lowest degree of measurement uncertainty. Preparation of your precision measurement test equipment is just as important as the calibration. Preparation varies and is equipment specific.

MQC is proud to announce another new capability. With the addition of the Omega state-of-the-art wind tunnel MQC has the ability to calibrate Anemometers (highly accurate to 1% of reading). The new Laboratory Grade Benchtop Wind Tunnel is designed to give a highly uniform flow rate over 152mm (6") test section with a variable adjustable speed from 0 to 10,000 RPM. The established differential pressure measurements versus flowrates are listed from 25 to 9000 FPM. Calibration sheets are included, which makes calibrating different flow sensors simple.

Uniform flowrate is determined by monitoring a highly repeatable differential pressure sensor which has been calibrated to each individual wind tunnel as a system. Each wind tunnel is supplied with two restrictive plates for achieving optimum low flowrates. The deluxe wind tunnel package provides an environmental monitoring system that measures barometric pressure, room temperature, humidity and differential pressure. By monitoring room conditions, standard differential pressures can be converted to actual differential pressure readings to ensure accurate flowrates.

We appreciate the opportunity to earn your business and look forward to speaking with you soon. Should you have any questions or want to obtain a price quote either visit us on-line and click "Request a Price Quote" or ask talk to friendly customer service representative.

When quality and precision matter, Micro Quality Calibration is the only choice. Join the more than 2,000 companies that have made us their calibration laboratory of choice.

Certification

Each calibration / repair / new equipment sale / used equipment sale comes with certificate traceable to N.I.S.T and includes:

  • Barcode & Instrument I.D.
  • Full Data (Before / After) Calibration and/or Repair
  • Condition Received / Condition Returned / Reason for Service
  • Description of Item incl. Model & Serial No.
  • Measuring Range
  • Procedure Used
  • Calibrating Tech
  • Temperature & Humidity
  • Accuracy
  • Calibration Standards Employed
  • Numbers Traceable to N.I.S.T.
  • Dual Signatures (Tech and Approval  Signature)
  • Certificate Number
  • Purchase Order
  • Calibration Date  / Next Cal Date
  • Recall / Cycle
  • Repair / Adjustment Note (when applicable)
  • A2LA Accreditation Logo (upon request)
  • Uncertainty (upon request)

Whether you have Primary Standards, Secondary Standards or Working Standards, MQC is one of the few Metrology Laboratories that has the ability to calibrate your precision measurement test equipment in each of its service line disciplines.Turnaround time is 5 business days with expedite service available.

On-site Calibration Services Available

  • Minimal down time lets you focus on maximizing value
  • Convenient
  • No shipping of delicate and costly instruments
  • Increase productivity
  • Expedite on-site service available

 

Proprietary Calibration Software Gives our Customers 24/7 Access

  • 24/7 Access to Certificates
  • 24/7 Access to Equipment Lists
  • 24/7 Access to Recall Reports
  • 24/7 Access to Calibration Data on your Equipment

MQC can not only help its customers create an accurate comprehensive recall list but also notifies its customers monthly on equipment past due, equipment due in the next 30 days and equipment due the following month to put you in complete control to better manage your precision measurement test equipment, ensure 100% conformity and minimize costly downtime. All this information is also available at your fingertips by simply accessing our web portal and entering your customer number and password.

Why Micro Quality Calibration?

  • Accredited to the highest standards
  • Leading State-of-the-art equipment
  • Environmentally controlled multi-laboratory facility
  • In-house and onsite calibration services available
  • Proprietary calibration software gives customers 24/7 access to certificates, equipment lists, recall reports, calibration data, and more
  • Each calibration / repair comes with certificate traceable to N.I.S.T, calibration data, standards used, and barcode for inventory tracking
  • Ability to repair any instrument we calibrate to the component level and certify to Manufacturer, Federal, Military and Industrial specifications
  • No subcontracting to 3rd parties
  • OEM Trained Technicians
  • Fast 5 business day turnaround time (expedite services available)
  • Free pick-up and delivery with shipments of seven (7) items or more (regionally)
  • Rest assured your valuable precision measurement test equipment will be packaged, picked-up, delivered, and shipped with care
  • Global shipping
  • Sales of over 160 lines of new / used precision measurement equipment (sale items are calibrated at no charge) 
  • Ability to calibrate Primary, Secondary and Working Standards in each category
  • Technical Support Available
  • Small Women Owned Business (matches both Federal and by State Guidelines)

When Quality and Precision Matter we are the only choice.

We represent over 160 lines of precision measurement equipment. Don’t forget to ask us about our used precision measurement test equipment product offering.  Below is a listing of just some of our of precision measurement equipment lines we represent and/or service. Please visit our Sales Tab for a listing.

 

  
 
 

 

 

 
9168 De Soto Avenue
Chatsworth, CA 91311 USA
Tel: (818)701-4969
Fax: (818)818-6285
 
© 2003-2017 Micro Quality Calibration
Share This Page: